Abstract

In this study, a one-pot synthesis of a molybdenum diselenide/nitrogen-doped graphene oxide (MoSe<inf>2</inf>/NGO) composite was demonstrated and used for the fabrication of an electrochemical pH sensor. The MoSe<inf>2</inf>/NGO composite was characterized using powder X-ray diffraction, infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller analysis. The electrochemical behavior at different pH values was determined by recording the open-circuit potential. When applied for pH detection, the MoSe<inf>2</inf>/NGO modified screen-printed electrode (SPE) showed good linearity with a sensitivity of 61.3 mV pH⁻¹ over a wide pH range of 2-14. In addition, the pH sensor exhibited a remarkably stable response, high reproducibility, and selectivity. The sensor was used to measure the acidity or alkalinity of real food and beverage samples. The results for these samples showed a relative error of less than 10% compared with the results obtained with the commercial pH meter. The portable sensor produced by screen printing electrodes paves the way for the development of simple, cost-effective, real-time, and robust pH sensors for the pH analysis of various sample matrices for clinical diagnostics, biosensing, and cost-effective applications.